Hot tel: +86- 371-866230866
HomePower Cable0.6/1KV XLPE/PVC LSF Non-armoured Power Cable

0.6/1KV XLPE/PVC LSF Non-armoured Power Cable

  • Voltage: 600/1000V.
  • Conductor: Aluminum/Copper/Tinned Copper.
  • Insulation: PVC/XLPE.
  • Cores: 1 core, 3 core, 4core, 2+1 core, 4+1 core, 3+2 core.
  • Sheath: PVC/PE
  • Size of area: 16mm, 25mm, 35mm, 50mm, 70mm, 95mm, 120mm etc.

The Description of Structure




1. PVC power(fire resistant) cables suitable for electrical power transmission and distribution lines with AC rated voltage U0/U up to and including 0.6/1 kV.
Note: the single core armored cables are used for D.C. system only. As for A.C. system, armor layer should be used of non-magnetic material or magnetic isolation measures.
2.It to be used for outdoor and indoor installation in damp and wet locations, in tunnel, in down wells,cable furrow or pipe,underground.
3. the cable size including 16mm armoured cable, 25mm armouredcable ,35-185mm cable

BS 7870-3.10-2001 orIEC 60502, BS, DIN, or others as per customer’s country


1.The long time working temperature is at 90℃, suffer short circuit (within 5
seconds), the temperature of core can not higher than 250℃
2.The ambient temperature should not lower than -10℃
3.The laying temperature should not lower than 0℃
4.Single core’s bend radius with no armor should not exceed 20D,single core’s bend
radius with armor should not exceed than 15D,three cores’ bend radius with armor
should not exceed 12D.

Number of Cores & Nominal Cross-section Area

Number of Cores 1 2 3 3+1 4 4+1
Section Area (mm 2 ) 1.5 – 500 1.5 – 500 2.5 – 300 4 – 300 2.5 – 300 2.5-300

Maybe You Like The Follow Products


Thank you for your message. It has been sent.
There was an error trying to send your message. Please try again later.
Go to Top