• Conductor:
  Round concentric lay class “B”
  stranded copper/ Aluminum compact class “B” strand
• Insulation:
  Cross-linked Polyethylene (XLPE)
• Bonding Conductor (Ground):
  Bare stranded class “B” copper
  conductor/ Bare stranded bare aluminum
  (ACM) conductor
• Inner Jacket:
  Polyvinyl Chloride (PVC), black
• Armour:
  Aluminum interlocked armour
• Outer Jacket:
  Low acid gas, flame-retardant, moisture and
  sunlight resistant Polyvinyl Chloride (PVC), black

• For concealed wiring in dry or wet locations
• For exposed wiring in dry or wet locations
• For exposed and wiring in dry, locations were subjected to corrosive action if suitable for corrosive conditions encountered
• For exposed wiring where subjected to the weather
• For use in ventilated, Non-ventilated, and ladder-type cable trays in
  dry or wet locations
• For direct earth burial (with protection as required by inspection
  authority)
• For service entrances above or below ground

The cable consists of multiple conductors, typically made of copper or aluminum, which carry the electrical current.

These conductors are insulated with a layer of material, such as cross-linked polyethylene (XLPE) or polyvinyl chloride (PVC), to prevent electrical leakage and ensure safe transmission.

The number of conductors can vary depending on the specific application and requirements.

• Rated at 90°C wet or dry
• Excellent crush resistance
• Provides long service life
• Cost effective alternative to installations in conduit
• Meets cold bend and impact tests at (-40°C)